Monthly Archives: April 2015

So you really want to manually configure the 6800ia? It’s possible

Below is the command syntax to enable the fex configurations mode. First you will have to run “service internal” command, it will enable the hidden commands. However, do not forget to turn off the commands after making the changes using “no service internal”

6800-1#config t

6800-1(config)#service internal

6800-1(config)#exit

6800-1#test platform software console fex 110 enable timeout 60  <<<<< This command will enable configuration mode on fex 110 for 60 minutes

 

Once done with the changes on the fex110, run the following command on the parent switch to turn off the service internal mode:

6800-1#config t

6800-1(config)#no service internal

6800-1(config)#exit